Historical RaspberryPi, Revision 15

Installing Euphoria on the Raspberry Pi

The current Euphoria 4.1.0 Beta2 can run on the Raspberry Pi.

See step-by-step installation instructions below.

Wrappers for GPIO interfacing



Building Euphoria for the Raspberry Pi



Example programs




Installing Euphoria and EuGTK on Raspberry Pi 3 with Raspbian.
Follow the links on the Downloads page to download:

  • EuGTK
  • Euphoria 4.1 beta 2 arm binary for manual installation
  • Wee Euphoria Editor

Download the latest EuGTK, and click on the tar.gz file, read the important note, then drag the demos folder into your home folder. You'll now have a /home/pi/demos folder.

Download WEE-master.zip.
Use archiver to extract to /home/pi (or /home/your_user_name)

Download euphoria-4.1.0-ARMv6-hardfloat-5.tar.gz Click on it, and extract to, let's say, your home folder.

Go to your home folder, and open a terminal to copy some files:

cd /euphoria-4.1.0-ARMv6-hardfloat/bin
sudo cp * /usr/bin
cd ..
sudo mkdir /usr/share/euphoria
sudo chmod 777 /usr/share/euphoria
sudo rm /usr/bin/eu.cfg
cp -r * /usr/share/euphoria

Confirm that eui is installed
Type eui at the command line:
pi@raspberrypi: $ eui
Euphoria Interpreter v4.1.0 development
32-bit Linux, Using System Memory
Revision Date: 2015-02-02 14:18:53, Id: 5861:57179171dbed

ERROR: Must specify the file to be interpreted on the command line

(So far, so good!)

Replace /usr/bin/eu.cfg with the following: (will probably have to use sudo nano to do this)

-eudir /usr/share/euphoria
-i /usr/share/euphoria/include

-arch ARM
-com /usr/share/euphoria
-lib-pic /usr/share/euphoria/bin/euso.a
-lib /usr/share/euphoria/bin/eu.a

-eub /usr/share/euphoria/bin/eub

Check that it works In a terminal, type:

cd /demos
eui test0

Should take a few seconds, and then show a nice window with info about GTK, EuGTK, current platform, etc.

Associate .ex files

  • Use file manager to navigate to /demos
  • Right-click on test0.ex or one of the other test*.ex files
  • Select Properties from the popup window
  • Select Open With -> Customize
  • Click on Custom Command Line
  • Enter eui as Command line to execute:
  • Enter Euphoria as the Application name
  • Click OK

Double click on an .ex program to see if it works.


The Raspberry Pi 3 is a bit slow, so binding your Euphoria programs is helpful. Especially WEE and other programs you will use frequently.

Translating and compiling large EuGTK programs on the Pi is also rather slow, so you may prefer to cross-compile on a full-size PC, and then copy the executable to the Pi.


Quick Links

User menu

Not signed in.

Misc Menu