OpenEuphoria

Re: [OT] Networking problem

• Posted by Guillermo Bonvehi <knixeur at speedy.com.ar> Jul 22, 2004
• 483 views

I dunno if this will help, but the broadcast address should be 192.168.1.255 and
netmask 255.255.255.127

On Wed, 21 Jul 2004 17:56:15 -0700
Chris Burch <guest at RapidEuphoria.com> wrote:

> 
> 
> posted by: Chris Burch <chriscrylex at aol.com>
> 
> Hi
> 
> I've tried other tech forums, and was just wondering if anyone here might be
> able to help me, or give me a pointer as to where to go (!)
> 
> Anyway, I've foolishley stuffed up the address of my shiny new adsl router.
> 
> Original config
> IP address    10.0.0.2
> Broadcast      255.0.0.0
> 
> This worked, by setting an ip aliased address on eth0 of 10.0.0.2 
> netmask 255.0.0.0, and so then I set it to
> IP address   192.168.1.10
> Broadcast    255.255.255.127
> (my network 192.168.1.0)
> 
> and found I could no longer talk to it, no matter what combination of
> ip 192.168.1.x, netmask 255.255.255.x, and broadcast 192.168.1.x I used
> (and lots of other combinations)
> 
> Please don't ask why I did this - I have no idea.
> 
> In answer to other questions that may be asked, its a Taiwanese AR41/2A 
> (can't find a company name) conexant chipset, with a reset button on the 
> back, that doesn't reset the flash memory.
> 
> I'm at my wits end, and am about to incorporate the box into the bathroom
> extension. Any ideas gratefully accepted.
> 
> Chris