OpenEuphoria

Re: Circuit Analysis

• Posted by Al Getz <Xaxo at aol.com> Mar 05, 2006
• 482 views

don cole wrote:
> 
> Hello All,
> 
> Here's some circuit analysis for you.
> 
> <a
> href="http://www.RapidEuphoria.com/uploads/lite">http://www.RapidEuphoria.com/uploads/lite</a>
> test.bmp
> 
> And here's my favorite, the holdin circuit.
> 
>  <a
>  href="http://www.RapidEuphoria.com/uploads/relay.bmp">http://www.RapidEuphoria.com/uploads/relay.bmp</a>
> 
> Seriously this could done with EuGrid (which I've never used).
> But I belive it's just a grid that you can paste pictures in different cells.
> Now if we could create standards like cell size, what point in the cell will
> the wire enter/exit, width of wire and so on, we could create a library to set
> up a schematic just by clicking in cells.
> 
> Picures needed for cells would be wire, fuse, battery, coil, relay, many types
> of switches, diodes, LEDS, transistors, FETS, opAmps, Flip-Flops,
> Microprcessors
> (probabley need more than one cell for that).
> 
> You get idea one wouldn't have to draw all those pictures just look them up
> in the Library and paste them on the grid.
> 
> Don Cole
> 
> 
> Don Cole

Hi Don,

Your first link didnt seem to work, only the second link worked.
Perhaps you can repost with the correct (first) link?

What is it you want to do here?

Take care,
Al

And, good luck with your Euphoria programming!

My bumper sticker: "I brake for LED's"