OpenEuphoria

RE: ListView Column Width

• Posted by Judith <camping at txcyber.com> May 27, 2002
• 468 views

I had not noticed in the listview examples that you could create the 
ListView with the column lengths and alignment. This is much easier than 
the sendMessage I put into IDE to do this. I'll make some changes for 
the next release. Thanks Dan.

With the next IDE release, probably August or September, I'll be 
requiring the use of the latest Win32lib. I'll be using several new 
routines recently developed; the one Derek mentions below is one of 
them.

Judith

Derek Parnell wrote:
> 
> > -----Original Message-----
> > From: Dan Moyer [mailto:DANIELMOYER at prodigy.net]
> > Sent: Monday, 27 May 2002 12:35
> > To: EUforum
> > Subject: Re: ListView Column Width
> > 
> > 
> > 
> > Jon,
> > 
> > I haven't used ListView, but a look at the ListView demo 
> > suggests that you
> > just put a column width in the ListView creation after the 
> > text; I changed
> > the "180" after "Library" to "80", and it gave a narrower 
> > column (don't know
> > what the '<' & '^' are all about, though):
> > 
> > LV = create(   ListView,
> >                 { {"Library",180,'<'}, {"Author",116,'^'} },
> >                 Win,
> >                 320,
> >                 40,
> >                 300, --CW_USEDEFAULT,
> >                 300, --CW_USEDEFAULT,
> >                 or_all({LVS_REPORT, LVS_SHOWSELALWAYS}))
> > 
> > Dan Moyer
> > 
> > ----- Original Message -----
> > From: "Jon Snyder" <jongsnyder at hotmail.com>
> > To: "EUforum" <EUforum at topica.com>
> > Sent: Sunday, May 26, 2002 10:47 AM
> > Subject: ListView Column Width
> > 
> > 
> > >
> > > When using a listview with Win32lib how can you adjust the 
> > width of the
> > > columns from the program?  It would be great to see an example.
> > >
> > >
> > >
> Yes you can. Either at ListView creation time (as Dan mentioned above) 
> or
> via the setLVColumn routine (I think that it's name). The '<', '^', '>'
> indicate left, centre and right aligned text respectively.
> 
> ------
> Derek.
> 
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht 
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en 
> de afzender direct te informeren door het bericht te retourneren. 
> and is intended to be exclusively for the addressee. Should you 
> receive this message unintentionally, please do not use the contents 
> herein and notify the sender immediately by return e-mail.
> 
> 
>