OpenEuphoria

system "feature"

• Posted by Mike Sabal <MikeS at NOTATIONS.COM> Apr 25, 2000
• 366 views

--- Part 1 ---
Maybe somebody can comment on this situation.  I'm running a Euphoria =
program on a network.  When using open/close/puts/etc., the program sees =
the network drives with no problem.  However, when using the system =
command, the network drives are invisible.  What's up with this?  Of =
course, if Euphoria 2.2 had built-in file processing commands, this may be =
much simpler. =20
--- Part 2 ---
After further testing, it seems only one drive is affected.  There's a =
hard disk partition that maps to G: on boot, but when the network drives =
are mapped, one of the network drives automatically maps to G: in the =
standard script.  This is the first occurrence I've seen of anything being =
able to see this partition when connected to the network.  Of course, I'm =
more interested in the network drive with this program, but I'd like to =
know if anyone has seen anything like this before.

Note: I temporarily worked around the problem by remapping the network =
drive to a different letter in the batch file, but that doesn't really =
solve the original problem.

Michael J. Sabal