OpenEuphoria

Re: Still stuck in an infinite loop

• Posted by Euman <euman at bellsouth.net> May 18, 2001
• 376 views

Sorry, forget that last post. I fudged it alittle but this one will work.

How many loops (while and for)?

 Try to use FLUSH( ) but contain it to only running once
 with an if statement like this:

 integer loop_one, loop_two, fn
 loop_one = 0
 loop_two = 0

 fn = open("logfile", "w")

 -- inside your loops
 for x = 1 to length(something) do *or* while true do

      if not loop_one then -- have to keep track of these for each loop
              puts(fn, loop_one) -- points to the nasty loop

              flush(fn)  -- This forces "Im in _blank_ procedure"
                            -- into "logfile" on disk.

              loop_one = 1 -- make sure to do this only once....
      end if

 end for *or* while

 Make sure that each "Im in _blank_ procedure" that _blank_ is a unique
name so you can track down the nasty loop.......

 Useing this routine you'll only need to do this once because the last
line in "logfile" will tell you where your problem area is.

 Sure this will take a few minutes to do, but it will work.
First, I suggest renameing the original .ex or .exw as looptst.ex or .exw
so you can save your work and come back to it later without spending
extra time takeing all of the routines to track the problem down out.

 run looptst.ex or .exw

 after rebooting your machine for the last time look at "logfile"
what procedure does it point to? FIX IT!

 Hope this helps!
Euman

 ----- Original Message -----
> From: <dstanger at belco.bc.ca>
> To: "EUforum" <EUforum at topica.com>
> Sent: Thursday, May 17, 2001 09:45
> Subject: Still stuck in an infinite loop
>
>
> >
> >
> > Hello again,
> >
> > Well, Ctrl + C did nothing and we have established that Ctrl + Break
> > overruns the computers memory. I still have no way to exit a Euphoria
> > program without it ending on its own. I am working on a program with several
> > loops in it and I am a very green novice so I am risking a crash (Having to
> > press ctrl + break) each time I run the program after adding or changing
> > code. Any more ideas on how to exit a program in mid stride?
> >
> > Thanks,
> > David
> >
> >
> >
> >
> >
>