1. New Request - Rob
Rob, there is a new cw402.zip file located on the devoresoftware ftp site.
I'm assuming that eu's dos interpretor is bound with the cw349.zip bundle.
The newer bundle allows SSE2 and SSE3 instructions to be executed without
causeing an exemption and found at ftp://ftp.devoresoftware.com/downloads
Wich version doe's eu's dos interpretor currently use? It might be a good
idea to bind the next dos release with the freshest causeway extender. It
would only benifit.
2. Re: New Request - Rob
Hayden McKay wrote:
>
> Rob, there is a new cw402.zip file located on the devoresoftware ftp site.
> I'm assuming that eu's dos interpretor is bound with the cw349.zip bundle.
>
> The newer bundle allows SSE2 and SSE3 instructions to be executed without
> causeing an exemption and found at ftp://ftp.devoresoftware.com/downloads
>
> Wich version doe's eu's dos interpretor currently use? It might be a good
> idea to bind the next dos release with the freshest causeway extender. It
> would only benifit.
I'm using some older version.
I'll try the latest one (4.02) for the Euphoria 3.0 alpha release.
If it doesn't cause any problems, I'll use it.
Thanks,
Rob Craig
Rapid Deployment Software
http://www.RapidEuphoria.com
3. Re: New Request - Rob
- Posted by Vincent <darkvincentdude at yahoo.com>
Mar 13, 2006
-
Last edited Mar 14, 2006
Robert Craig wrote:
> I'm using some older version.
> I'll try the latest one (4.02) for the Euphoria 3.0 alpha release.
> If it doesn't cause any problems, I'll use it.
Hi,
I tested the latest CauseWay extender stub and it works just fine. The file is
called CW32.EXE instead of CWSTUB.EXE. So you either have to modify the
translator to use CW32.EXE inside OBJFILES or rename CW32.EXE to CWSTUB.EXE.
Regards,
Vincent
4. Re: New Request - Rob
- Posted by Robert Craig <rds at RapidEuphoria.com>
Mar 13, 2006
-
Last edited Mar 14, 2006
Vincent wrote:
>
> Robert Craig wrote:
>
> > I'm using some older version.
> > I'll try the latest one (4.02) for the Euphoria 3.0 alpha release.
> > If it doesn't cause any problems, I'll use it.
>
> I tested the latest CauseWay extender stub and it works just fine. The file
> is called CW32.EXE instead of CWSTUB.EXE. So you either have to modify the
> translator
> to use CW32.EXE inside OBJFILES or rename CW32.EXE to CWSTUB.EXE.
Thanks. That's useful to know.
Regards,
Rob Craig
Rapid Deployment Software
http://www.RapidEuphoria.com
