1. Using EUGrid in IDE
- Posted by Craig Welch <euphoria at welchaviation.org> Jul 30, 2004
- 681 views
I'm sure the answer to this question, when revealed to me by the august participants in this forum, will be so blindingly obvious that I will thwack myself on the forehead with the palm of my hand, and utter in a soulful way 'Duh'! Maybe it's just too late at night. But here goes: I want to build a grid. I've done a little fooling around with the samples, and made a grid like the one I want, outside IDE. Now I want to add this grid to an existing IDE project. I open up the project, and click 'grid', click again, and there it is. A grid exists. Now, just where in the IDE environment do I enter the code that will give the grid the necessary attributes? Code such as 'EGW-ADDColumn'? If this was a button or field, I could trap user actions by using IDE to setup actions for 'onClick', etc. How in IDE do I trap user actions such as EGW_CELLCHANGE? Thanks all, -- Craig
2. Re: Using EUGrid in IDE
- Posted by Jonas Temple <jtemple at yhti.net> Jul 30, 2004
- 699 views
Craig Welch wrote: > > > I'm sure the answer to this question, when revealed to me by the august > participants > in this forum, will be so blindingly obvious that I will thwack myself on the > forehead > with the palm of my hand, and utter in a soulful way 'Duh'! > > Maybe it's just too late at night. But here goes: > > I want to build a grid. I've done a little fooling around with the samples, > and made > a grid like the one I want, outside IDE. > > Now I want to add this grid to an existing IDE project. I open up the project, > and > click 'grid', click again, and there it is. A grid exists. Now, just where in > the IDE > environment do I enter the code that will give the grid the necessary > attributes? Code > such as 'EGW-ADDColumn'? > > If this was a button or field, I could trap user actions by using IDE to setup > actions > for 'onClick', etc. How in IDE do I trap user actions such as EGW_CELLCHANGE? > > Thanks all, > > -- > Craig > Craig, To add a column to the grid just select a control and drop it into the (i.e. a static control). This will add the necessary EGW_AddColumn to the grid. As far as EuGrid event handling is concerned, all events are sent to the _onEvent routine for the grid control. In the event you'll have to disect the parameters to determine what the event was. Here's an EuGrid event handling routine from one of my programs:
procedure ColMapEG_onEvent (integer self, integer event, sequence params)--params is ( int iMsg, atom wParm, atom lParm ) atom msg, wParam, lParam, row_count sequence check_libs, msgs object row_data -- Extract message and params msg = params[1] wParam = params[2] lParam = params[3] -- On cell change save the data for the cell being exited if msg = EGW_CELLCHANGE then void = EGW_SaveCellData(ColMapEG, EGW_GetCurrentCell(ColMapEG)) -- When the row changes elsif msg = EGW_ROWCHANGE then row_data = EGW_GetDataRow(ColMapEG, wParam) -- The user must select either a column name or type a default value -- for each record if not length(row_data[CSVColumn]) and not length(row_data[DftValue]) then void = message_box("You must select either a column name or supply a default " & "value for each column!", "Missing Column Data", MB_OK) -- Ensure the cell in error is displayed void = EGW_ScrollToCell(ColMapEG, wParam, CSVColumn) -- Set the focus to the library grid setFocus(ColMapEG) -- This instructs the grid control to not perform any more processing -- for this event returnValue(True) return end if -- The user must not select a column name and type a default value -- for each record if length(row_data[CSVColumn]) and length(row_data[DftValue]) then void = message_box("You can only select either a column name or supply a default " & "value for each column!", "Column Data Specified Twice", MB_OK) -- Ensure the cell in error is displayed void = EGW_ScrollToCell(ColMapEG, wParam, CSVColumn) -- Set the focus to the library grid setFocus(ColMapEG) -- This instructs the grid control to not perform any more processing -- for this event returnValue(True) return end if -- If the user specified a default value then ensure the data is consistent -- with the column type if length(row_data[DftValue]) then if find(row_data[ColType],sql_numeric_types) then rtn_obj = value(row_data[DftValue]) if rtn_obj[1] != GET_SUCCESS then void = message_box("Default value is invalid for column Type", "Invalid Default Value", MB_OK) -- Ensure the cell in error is displayed void = EGW_ScrollToCell(ColMapEG, wParam, DftValue) -- Set the focus to the library grid setFocus(ColMapEG) -- This instructs the grid control to not perform any more processing -- for this event returnValue(True) return end if end if end if end if end procedure setHandler( ColMapEG, w32HEvent, routine_id("ColMapEG_onEvent"))
Make sure you also take a look at the documentation that comes with EuGrid, it will explain this in more detail. Jonas
3. Re: Using EUGrid in IDE
- Posted by Craig Welch <craig at wedgetail.com> Jul 31, 2004
- 643 views
Jonas Temple wrote: >Craig, > >To add a column to the grid just select a control and drop it into the >(i.e. a static control). This will add the necessary EGW_AddColumn to >the grid. Got it. That works fine, thanks. Now, if I do that, I'm not able to format the columns in all of the various ways defined by EuGrid, am I? For example, if I attempt to use a multi-line edit control, IDE says: "Invalid control for EuGrid". Is there a way of creating such a control myself, somewhere in IDE's editor? One of the key aspects of EuGrid is the separation of the underlying data and the data presented in the grid. That's why, when creating a grid column, one of the parameters is 'DataColumn'. In my project, for example, my data are arranged in 11 columns, but I only need to display 5 of them. In IDE, it seems that I must create a grid column for each dataset column. I've tried unchecking 'visible' on the un-needed columns, but they're still displayed. As I type this, it occurs to me that I might just set the column width to zero for the un-needed columns. I'll try that shortly. >As far as EuGrid event handling is concerned, all events are sent to the >_onEvent routine for the grid control. In the event you'll have to >disect the parameters to determine what the event was. Here's an >EuGrid event handling routine from one of my programs: > > Aha! I understand. And thanks for your example, which provides me with a good template. >Make sure you also take a look at the documentation that comes with >EuGrid, it will explain this in more detail. > Heh, fair suggestion. But prior to posting, I had read every word. I'm fairly comfortable with how to use EuGrid's functions and messages. The two things I didn't understand were how to establish the functions and how to get access to the messages within the IDE environment. You've given me two 'Aha' explanations. Neither of which is mentioned in the EuGrid documentation. Thanks, -- Craig
4. Re: Using EUGrid in IDE
- Posted by Jonas Temple <jtemple at yhti.net> Jul 31, 2004
- 644 views
Craig Welch wrote: > Now, if I do that, I'm not able to format the columns in all of the > various ways defined by EuGrid, am I? For example, if I attempt to use > a multi-line edit control, IDE says: "Invalid control for EuGrid". Is > there a way of creating such a control myself, somewhere in IDE's editor? > > One of the key aspects of EuGrid is the separation of the underlying > data and the data presented in the grid. That's why, when creating a > grid column, one of the parameters is 'DataColumn'. In my project, for > example, my data are arranged in 11 columns, but I only need to > display 5 of them. In IDE, it seems that I must create a grid column > for each dataset column. I've tried unchecking 'visible' on the > un-needed columns, but they're still displayed. > > As I type this, it occurs to me that I might just set the column width > to zero for the un-needed columns. I'll try that shortly. > I think Judith is working on enhancements to the IDE to handle multi-line edit controls. I think she also realizes that the IDE doesn't quite handle all of the features of EuGrid. Judith, if I've spoken out of turn feel free to correct me. One suggestion...you could just use the IDE to place the grid control in the window and then using the code editor go into the Into or General section and type the EGW_AddColumn calls yourself. That way you'd be able to set the underlying column. Jonas
5. Re: Using EUGrid in IDE
- Posted by Craig Welch <craig at wedgetail.com> Jul 31, 2004
- 655 views
Jonas Temple wrote: > One suggestion...you could just use the IDE to place the grid control > in the window and then using the code editor go into the Into or General > section and type the EGW_AddColumn calls yourself. That way you'd be > able to set the underlying column. OK, I didn't realise I could put EuGrid controls there. I'll experiment with that. Thanks,
6. Re: Using EUGrid in IDE
- Posted by Craig Welch <craig at wedgetail.com> Jul 31, 2004
- 676 views
Craig Welch wrote: > Jonas Temple wrote: >> One suggestion...you could just use the IDE to place the grid control >> in the window and then using the code editor go into the Into or >> General section and type the EGW_AddColumn calls yourself. That way >> you'd be able to set the underlying column. > OK, I didn't realise I could put EuGrid controls there. I'll > experiment with that. Which works fine. I'm now using IDE to build the grid *and* the columns, and modifying them as required in the General section. I'm now cookin' with EuGrid, which is great ... I had started to build an editor for my data myself, and this has removed much work for me. Thanks for your help Jonas. -- Craig
7. Re: Using EUGrid in IDE
- Posted by Jonas Temple <jtemple at yhti.net> Jul 31, 2004
- 677 views
Craig Welch wrote: > Which works fine. I'm now using IDE to build the grid *and* the > columns, and modifying them as required in the General section. > > I'm now cookin' with EuGrid, which is great ... I had started to build > an editor for my data myself, and this has removed much work for me. > > Thanks for your help Jonas. > > -- > Craig Not a problem, that's why we're here! To be honest, I have an EuGrid in almost every program I wrote. If I didn't have that control I don't know what the alternatives would be. Well, it would probably be me working on my grid control that I stopped working on when EuGrid came out! Jonas