OpenEuphoria

2. Re: ver. 4.0 how to build ex.exe

• Posted by mattlewis (admin) Sep 20, 2008
• 1591 views

The batch files haven't been maintained. I don't know if anyone has successfully built ex.exe with DJGPP. You can build it with OpenWatcome, using the makefile.wat. Look at the top of the makefile for the various make targets that are available.

Matt

4. Re: ver. 4.0 how to build ex.exe

• Posted by mattlewis (admin) Sep 20, 2008
• 1562 views

I'll say it again: Do not use the batch files to build euphoria.

I only ever build DOS by accident, so I've reached the end of my useful knowledge of building DOS binaries. Did you actually try the makefile? It wasn't clear from your message if you did or not.

Matt

6. Re: ver. 4.0 how to build ex.exe

• Posted by bernie Sep 20, 2008
• 1543 views

Matt:

Yes I used MAKEFILE.WAT it does not work with OPENWATCOM Ver 11.6
because OPENWATCOM DOES NOT have go32.exe or have a go32.h.
But go32 is used through out the euphoria source code.

8. Re: ver. 4.0 how to build ex.exe

• Posted by DerekParnell (admin) Sep 20, 2008
• 1562 views

In the source code one can see this sort of thing...

#	ifdef EDJGPP 
#		include <go32.h> 
#	endif 
... 
#ifdef EDJGPP                        
   if ((unsigned)peek2_addr <= LOW_MEMORY_MAX) 
     top = _farpeekl(_go32_info_block.selector_for_linear_memory,  
          (unsigned)peek2_addr++); 
   else     
#endif 

I use OpenWatcom v1.7. The batch file that I wrote to compile the systems on my machine is

%echo off 
%echo buildall.bat 
set EDJGPP= 
set ORIGINALWATCOM= 
set EBORLAND= 
set ELCC= 
set EMINGW= 
set EUNIX= 
 
set SRC=C:\Projects\eu_proj\eu40\trunk\source 
set BIN=C:\Projects\eu_proj\eu40\trunk\bin 
set BKUP=C:\backup\eubin 
 
cd %SRC% 
 
wmake -f makefile.wat clean 
wmake -f makefile.wat distclean 
call configure 
wmake -f makefile.wat all 
 
%echo off 
if exist %BIN%\BACKENDD.EXE copy /Y /B %BIN%\BACKENDD.EXE %BKUP%\ 
if exist %BIN%\EC.EXE copy /Y /B %BIN%\EC.EXE %BKUP%\ 
if exist %BIN%\ec.lib copy /Y /B %BIN%\ec.lib %BKUP%\ 
if exist %BIN%\EX.EXE copy /Y /B %BIN%\EX.EXE %BKUP%\ 
if exist %BIN%\backendc.exe copy /Y /B %BIN%\BACKENDC.EXE %BKUP%\ 
if exist %BIN%\backendw.exe copy /Y /B %BIN%\BACKENDW.EXE %BKUP%\ 
if exist %BIN%\ecw.lib copy /Y /B %BIN%\ecw.lib %BKUP%\ 
if exist %BIN%\ecw.exe copy /Y /B %BIN%\ecw.exe %BKUP%\ 
if exist %BIN%\exwc.exe copy /Y /B %BIN%\exwc.exe %BKUP%\ 
if exist %BIN%\exw.exe copy /Y /B %BIN%\exw.exe %BKUP%\ 
 
if exist %SRC%\BACKENDD.EXE move /Y %SRC%\BACKENDD.EXE %BIN%\ 
if exist %SRC%\EC.EXE move /Y %SRC%\EC.EXE %BIN%\ 
if exist %SRC%\ec.lib move /Y %SRC%\ec.lib %BIN%\ 
if exist %SRC%\EX.EXE move /Y %SRC%\EX.EXE %BIN%\ 
if exist %SRC%\backendc.exe move /Y %SRC%\BACKENDC.EXE %BIN%\ 
if exist %SRC%\backendw.exe move /Y %SRC%\BACKENDW.EXE %BIN%\ 
if exist %SRC%\ecw.lib move /Y %SRC%\ecw.lib %BIN%\ 
if exist %SRC%\ecw.exe move /Y %SRC%\ecw.exe %BIN%\ 
if exist %SRC%\exwc.exe move /Y %SRC%\exwc.exe %BIN%\ 
if exist %SRC%\exw.exe move /Y %SRC%\exw.exe %BIN%\ 

10. Re: ver. 4.0 how to build ex.exe

• Posted by bernie Sep 22, 2008
• 1546 views

Does anybody know where Jermey is ?

1. I need to know what OS he was using to build the WIN98 Binaries on.

2. What files he has to EDIT to compile using openwatcom.

3. What order and steps he is using for the compile and any special
batch files he is using.

4. I need to know how his OS environment and Watcom environment are setup.

I am very frustrated trying to do a simple compile of the binaries using
the make file to create the EX.EXE file.

I keep running into problems with compiler trying to use DJGPP when it
should't.

Who knows what else has to be edited to kill the DJGPP problem.

I have no idea what configure.bat is suppose to accomplish it just wipes
outconfig.wat which has to contain MANAGED_MEM=1 and ??

makefile.wat has to be edited and has notes in it that it doesn't work
for WIN98.

It is ridiculous that there SIMPLY is not a WIN98 option built into the
makefile.wat instead of all this editing.

On top of all that the SVN trunk keeps giving me errors while trying
to update or checkout.

12. Re: ver. 4.0 how to build ex.exe

• Posted by gbonvehi Sep 22, 2008
• 1546 views

Bernie, check your PATH enviroment value, probably DJGPP binaries are before in the order. To see the current value, type (in a dos command prompt): echo %PATH% To change it temporarily, type: PATH=YOURDIRECTORY/BIN;%PATH% Then, in the same prompt (that's important), try to compile.

14. Re: ver. 4.0 how to build ex.exe

• Posted by ne1uno Sep 22, 2008
• 1530 views

pick a compiler and version. openwatcom 1.5 and 1.7 work here. haven't tried watcom 11 but minGW w/gcc3.4 now works, look up messages on the dev list to see how to compile.

put into your enviornment WATCOM=path to watcom using set= or however that is done on win2k

makefile.wat won't have to be edited unless you are running wmake on win9x.

first run configure then edit config.wat

dosall makes ex.exe and related files winall makes exw & exwc and related files

everyone deals with the sourceforge problems. make sure the url you are using is is https, wait a few minutes a try again, just update one dir at a time, whatever works.

16. Re: ver. 4.0 how to build ex.exe

• Posted by bernie Sep 22, 2008
• 1573 views
• Last edited Sep 23, 2008

I did a checkout of SVN 1182

I ran a clean and distclean

I added 1173 binaries to 1182 bin dir

I ran configure.bat and got an empty config.wat

I added MANAGED_MEM=1 to the config.wat file.

I ran wmake -f makefile.wat all

This is the error that occured when the compiler got to
building the DOS ex.exe file.

{{{ wmake -f makefile.wat ex.exe EX=..\bin\ex.exe EU_TARGET=int. OBJDIR=doso bj DEBUG= MANAGED_MEM=1 OS=DOS Open Watcom Make Version 1.6 Portions Copyright (c) 1988-2002 Sybase, Inc. All Rights Reserved. Source code is available under the Sybase Open Watcom Public License. See http://www.openwatcom.org/ for details. ..\bin\ex.exe -i ..\include revget.ex wcc386 /bt=nt /mf /w0 /zq /j /zp4 /fp5 /fpi87 /5r /otimra /s /I..\ .\d osobj\0emory.c -fo=.\dosobj\0emory.obj .\dosobj\0emory.c(2): Error! E1055: Unable to open 'go32.h' Error(E42): Last command making (.\dosobj\0emory.obj) returned a bad status Error(E02): Make execution terminated Error(E42): Last command making (dos) returned a bad status Error(E02): Make execution terminated Error(E42): Last command making (dosall) returned a bad status Error(E02): Make execution terminated Error(E42): Last command making (all) returned a bad status Error(E02): Make execution terminated }}}

18. Re: ver. 4.0 how to build ex.exe

• Posted by bernie Sep 23, 2008
• 1540 views

That does not build EX.EXE

See my previous post that show the errors.

Thanks Derek

20. Re: ver. 4.0 how to build ex.exe FOUND PROBLEM

• Posted by mattlewis (admin) Sep 23, 2008
• 1515 views

The problem is coming from InitBackEnd in traninit.e in this if statement:

	if TDOS then 
		wat_path = 0 
		if length(compile_dir) then 
			if djg_option then 
				dj_path  = compile_dir 
			else 
				wat_path = compile_dir 
			end if 
			return 
		end if 
			 
		dj_path = getenv("DJGPP") 
		if atom(dj_path) or wat_option then 
			wat_path = getenv("WATCOM") 
			if atom(wat_path) then 
				wat_path = "C:\\WATCOM" 
			end if 
			dj_path = 0 
		end if 
		if djg_option and atom(dj_path) then 
			CompileErr("DJGPP environment variable is not set") 
		end if 
		if wat_option and atom(wat_path) then 
			CompileErr("WATCOM environment variable is not set") 
		end if 
	end if 

We should probably specify the -wat option in makefile.wat. Or possibly revisit the logic above if that's not working correctly.

Matt

22. Re: ver. 4.0 how to build ex.exe FOUND PROBLEM

• Posted by bernie Sep 24, 2008
• 1521 views

If a user has a DJGPP compiler on their system and has the enviornment 
variable DJGPP=D:\DJGPP\DJGPP.ENV even though it is not added to the 
path. 

Then why didn't you correct the error in the code in traninit.e if you knew about it ?

24. Re: ver. 4.0 how to build ex.exe FOUND PROBLEM

• Posted by bernie Sep 24, 2008
• 1522 views

If a user has a DJGPP compiler on their system and has the enviornment 
variable DJGPP=D:\DJGPP\DJGPP.ENV even though it is not added to the 
path. 

Thats ok but if you didn't help me as much as you did I would be still struggling and stumbling along trying to build the binaries.

Thanks again ! Bernie