1. gt1 and gt2

David Mosley writes:
> I am running the gt1 and gt2 outside the program.
> Could that be the problem?

I took a closer look at David Gay's gt1 and gt2 demos.
He is testing a long list of graphics modes to see if
graphics_mode() will report success or not.

I have found that on many machines there are graphics
modes (typically SVGA) that will simply hang up the system
if you try to switch into them. The program won't be able to recover
and try a different mode. I bet this is the case on your machine
when you run these demos.

Regards,
  Rob Craig
  Rapid Deployment Software

new topic     » topic index » view message » categorize

2. Re: gt1 and gt2

Thanks guys for all the help.Robert I do have a SVGA montor also David and
Michael
I get it now I did not know that you had put a vaule to c before you can
use it.Just one of those BASIC jump up and bite you things.Thanks David for
the sample program that really helps

new topic     » goto parent     » topic index » view message » categorize

3. Re: gt1 and gt2

> I took a closer look at David Gay's gt1 and gt2 demos.
> He is testing a long list of graphics modes to see if
> graphics_mode() will report success or not.
>
> I have found that on many machines there are graphics
> modes (typically SVGA) that will simply hang up the system
> if you try to switch into them. The program won't be able to recover
> and try a different mode. I bet this is the case on your machine
> when you run these demos.
>
Hi Robert

Is there anything I can add to or change in these programs to prevent such
a lockup from happening?

Thanks

David Gay

new topic     » goto parent     » topic index » view message » categorize

4. Re: gt1 and gt2

David Gay writes:
> Is there anything I can add to or change in these programs to prevent such
> a lockup from happening?

On one machine here your gt1 works fine but your gt2 causes a problem
in mode 256. So I fiddled around with gt2 and found I could eliminate
the problem by removing the statement that switches back to
graphics_mode(-1) before displaying the video parameters. I moved it
to the end of the program. Here's my new version:

----------------------------------------------------------------------
include graphics.e
sequence screen_modes, video_settings
atom counter
integer screen_set_status
screen_modes = {0,1,2,3,4,5,6,7,11,13,14,15,16,17,18,19,256,257,258,259,260,
261,262,263,-999}
counter = 1
while screen_modes[counter] != -999 do
     screen_set_status = graphics_mode(screen_modes[counter])
     if screen_set_status = 0 then
          video_settings = video_config()
          --screen_set_status = graphics_mode(-1) -- REMOVED
          printf(1, "Mode %d supports the following attributes:\n\n",
               {screen_modes[counter]})
          if video_settings[1] = 1 then
               puts(1, "     Has Colour\n")
          else
               puts(1, "     Has No Colour\n")
          end if
          printf(1, "     Has %d text rows and %d text columns\n",
               {video_settings[3], video_settings[4]})
          if video_settings[5] + video_settings[6] > 0 then
               printf(1, "     Has %d pixels across and %d pixels down\n",
                    {video_settings[5], video_settings[6]})
          end if
          printf(1, "     Has %d colours available\n", {video_settings[7]})
          printf(1, "     Has %d display pages accessible\n\n",
               {video_settings[8]})
          puts(1, "Press Any Key To Continue\n")
          while get_key() = -1 do
          end while
     end if
     counter = counter + 1
end while
puts(1, "\n\nProgram Example Completed. Press Any Key To End\n")
while get_key() = -1 do
end while
if graphics_mode(-1) then  -- moved it HERE
end if
------------------------------------------------------------------

I'm not sure why this works, but mode 256 has always given me problems
in a DOS window under Windows 95 on one machine here.
Mode 256 works fine if I reboot Win95 in DOS mode.
I don't know if this change will help on other machines.

Regards,
  Rob Craig
  Rapid Deployment Software

new topic     » goto parent     » topic index » view message » categorize

5. Re: gt1 and gt2

Hi Robert

> On one machine here your gt1 works fine but your gt2 causes a problem
> in mode 256. So I fiddled around with gt2 and found I could eliminate
> the problem by removing the statement that switches back to
> graphics_mode(-1) before displaying the video parameters. I moved it
> to the end of the program. Here's my new version:

(cutting with cyberscissors....*vhrrrrrrrrrrr-r-r-r-r-r-r-r-r!!!!*)

> I'm not sure why this works, but mode 256 has always given me problems
> in a DOS window under Windows 95 on one machine here.
> Mode 256 works fine if I reboot Win95 in DOS mode.
> I don't know if this change will help on other machines.

I'll make the revised source available on my web page as a GT2.EX patch.
Thank you :)

David Gay

new topic     » goto parent     » topic index » view message » categorize

Search



Quick Links

User menu

Not signed in.

Misc Menu