OpenEuphoria

1. WEE-41 UPX fail on Ubuntu 15.10 64-bit

• Posted by K_D_R Dec 21, 2015
• 1541 views

This is very strange. On WEE-41 and several previous versions I have experienced strange results with the Translate-Compile option.

The upx code seems to be executing prior to the translate compile code.

This is a capture of the lxterminal cosole output upon running wee.exw v. 41 in a terminal and then selecting translate and compile with only the test run after bind/shroud translate option selected:

kenneth@kenneth-desktop:~/wee/wee41$ eui wee.exw wee.exw 
/usr/bin/upx 
                       Ultimate Packer for eXecutables 
                          Copyright (C) 1996 - 2013 
UPX 3.91        Markus Oberhumer, Laszlo Molnar & John Reiser   Sep 30th 2013 
 
        File size         Ratio      Format      Name 
   --------------------   ------   -----------   ----------- 
upx: wee: FileNotFoundException: wee 
 
Packed 0 files. 
 

The "Run in background" option was not selected. A gnome-terminal window opened immediately and reported the progress of translation/compile operation during which time the wee.exw code page remained unshaded. Upon completion of the translation/compile process the gnome-terminal window closed. A check of the wee41 folder revealed that the file had been translated/compiled, but not packed by UPX:

kenneth@kenneth-desktop:~/wee/wee41$ ls -s 
total 2996 
   4 EuGTK        4 scintilla      48 ui_gtk.e   *** 2676 wee ***        12 weeicon.e 
  84 parser.e    76 scintilla.e     4 updater.ex    88 wee.exw 
 
{{{ 
 
When I run the translate/compile option again. The upx function executes immediately and compresses the wee binary created by the previous run. 
 
{{{ 
/usr/bin/upx 
                       Ultimate Packer for eXecutables 
                          Copyright (C) 1996 - 2013 
UPX 3.91        Markus Oberhumer, Laszlo Molnar & John Reiser   Sep 30th 2013 
 
        File size         Ratio      Format      Name 
   --------------------   ------   -----------   ----------- 
   2740216 ->    813644   29.69%  linux/ElfAMD   wee                            
 
Packed 1 file. 
 

Then the wee.exw code is translated and compiled again, overwriting the previously created compressed wee binary.

On the second run the editor window shaded and remained shaded and unresponsive, even after the translation/compile task completed. I had to force the unresponsive window to close.

Bind fails in the same manner. On the first run, upx will try to compress filebase(file_name) before executing eubind, then a bound version of file_name is created which is not compressed. On the 2nd run, the previously created bound file is compressed; however execution fails with the message:

kenneth@kenneth-desktop:~/wee/wee41$ ./wee 
<0302>:: no Euphoria IL code to execute 

I do not believe that bound euphoria programs are compressable with upx.

I edited the translate compile clause in RunStart as follows:

-- insert before RunStart in ui_gtk.e 
function background(sequence cmd) 
-- for use with system_exec(cmd[1], cmd[2]) 
    cmd &= " &" 
    cmd[1] = cmd 
    cmd[2] = 1 -- the previous graphics mode is restored  
               -- and the screen is cleared.  
    if run_background then 
        cmd[2] = 0 -- a beep sound will be made and the program will wait for the user to press a key before the previous graphics mode is restored.  
    end if 
return cmd 
end function 
 
-- replaces existing translate/compile code in function RunStart. 
-- if run menu option "Run in Backround is not selected 
-- progress will be reported in the 
-- system default terminal emulator 
-- a keypress is required to proceed 
-- to the next process. 
 elsif equal(lbl, "Translate and Compile") then 
	if file_exists(filebase(file_name)) then 
-- else upx will execute first, 
-- compressing the existing file, 
-- and then a new file will be created, 
-- which will not be compressed!	    delete_file(filebase(file_name)) 
	end if 
        cmd &= get_eu_bin("euc") & ' ' & quote_spaces(file_name) 
        cmd = background(cmd)  -- requires function background(sequence cmd) 
	if system_exec(cmd[1], cmd[2]) = 0 then  -- file translated/compiled successfully 
            cmd = "upx " & filebase(file_name)  
            cmd = background(cmd) 
	    if system_exec(cmd[1], cmd[2]) = 0 then  -- executable file packed successfully 
                if run_testrun then 
                    cmd = "./" & filebase(file_name) 
                    cmd = background(cmd) 
                    if system_exec(cmd[1], cmd[2]) = 0 then 
                    end if 
                end if 
            end if 
        end if 

Perhaps it would be easier not to support upx. Or maybe add a discrete option to the Run menu.

Regards, Ken

3. Re: WEE-41 UPX fail on Ubuntu 15.10 64-bit

• Posted by jimcbrown (admin) Dec 22, 2015
• 1395 views

kenneth@kenneth-desktop:~/wee/wee41$ eui wee.exw wee.exw 

I don't know anything about wee, but this makes sense.

The first part, is just eui.

The first two parts, say to run wee from the source code:

eui wee.exw 

The third part is thus a parameter to wee itself. Like so,

eui wee.exw myprogramtoedit.ex 

This is probably the code to edit/translate/compile/bind/etc.

So the following,

eui wee.exw wee.exw 

is just running wee and telling wee to open its own source code (so K_D_R can use wee itself to create its own executable and run UPX on it).

5. Re: WEE-41 UPX fail on Ubuntu 15.10 64-bit

• Posted by K_D_R Dec 23, 2015
• 1429 views

OK, I this is what I have learned thus far on my Linux, Ubuntu 15.1 64 bit system with the following terminal emulators installed: xterm, xfce4-terminal, gnome-terminal, lxterminal, mate-terminal

• The "Wait For Keypress after Run in Terminal" option only works with xterm.

• UPX only works consistently correctly with xterm.

• "Wait For Keypress after Run" makes it easy to monitor the success/failure of Translate/Compile/Compress.

Xterm has an incredibly small default font size. Installing a better font set is way too much trouble. But for most purposes, it will probably suffice.

Other terminal emulators, such as the xfce4-terminal, which are highly configurable and easy on the eyes can be used for well behaved Linux console programs.

So I decided to make xterm default whenever "Wait For Keypress ...", or "Translate and Compile is selected from the Run menu. An easier to use, SEE, and configure terminal emulator selected from the "Set Terminal Emulater" run menu option will be automatically be used for all other terminal emulator purposes.

--<=== marks code insertion block or line 
procedure Run(sequence cmd) 
sequence prev_term = terminal_program  --<=== 
    if length(terminal_program) then 
        if run_waitkey then 
            -- don't show "Press Enter" on errors 
            terminal_program = "xterm -e"  --<=== 
            cmd = match_replace("eui ", cmd, "eui -batch ") 
            cmd &= " ; read -p \"\nPress any key...\" -n1 -s" 
        end if 
        if run_waitkey or ends(" -e", terminal_program) then 
            cmd = quote_spaces(cmd) 
        end if 
        cmd = terminal_program & ' ' & cmd 
    end if 
    if run_background then 
        cmd &= " &" 
    end if 
    system(cmd) 
    terminal_program = prev_term --<=== 
end procedure 
 
 
-- function RunStart(atom ctl) 
function RunStart(atom ctl) 
    object lbl = gtk:get(ctl, "label") 
    sequence cmd = "" 
    integer wk = 0 --<=== run_waitkey switch back flag 
-- 
-- 
elsif equal(lbl, "Translate and Compile") then 
	--<===------------------------------ 
	if run_waitkey = 0 then 
	    run_waitkey = 1 
	    wk = 1  --< set switch back flag 
	end if 
	--<===------------------------------- 
	cmd &= get_eu_bin("euc") & ' ' & quote_spaces(file_name) 
	if system_exec("which upx") = 0 then 
	    cmd &= " && upx " & filebase(file_name) 
	end if 
	if run_testrun then 
	    cmd &= " && ./" & filebase(file_name) 
	end if 
	Run(cmd) 
	--<====--------------------------------------- 
	if wk then 
	-- switch run_waitkey back to 0 
	    run_waitkey = 0 
	end if 
	--<===---------------------------------------